Install a Topaz Signature Pad

This guide explains the recommended hardware and Windows setup for signing clinical documents in Enceit Care.

Use the Topaz T-LBK462-BSW signature pad with Topaz SigWeb.

Before you begin

  • Use a Windows 10 or newer computer.
  • Use a supported Chromium browser such as Google Chrome or Microsoft Edge.
  • Connect the pad directly to the computer when possible. Avoid an unpowered USB hub during setup.
  • Have local Windows administrator access so SigWeb can be installed.

Installation

  1. Disconnect the signature pad from the computer.
  2. Download the official Topaz SigWeb installer: sigweb.exe.
  3. Run the installer as a Windows administrator.
  4. Follow the installer prompts and select COM5 as the port.
  5. Restart Windows after installation if the installer requests it.
  6. Connect the T-LBK462-BSW directly by USB.

Verify Topaz is on COM5

  1. Open Device Manager.
  2. Expand Ports (COM & LPT) and locate the Topaz device.
  3. If the Topaz device is not listed, resolve the USB or driver issue before continuing.
  4. If the device is assigned to a port other than COM5, right-click it and select Properties.
  5. Open Port Settings, then select Advanced.
  6. Set COM Port Number to COM5 and select OK.
  7. Select OK again to close the device properties.
  8. Open the Topaz SigWeb configuration utility.
  9. Set the SigWeb port to COM5, save the configuration, and restart SigWeb.

Important: If the driver and the device are using different COM ports, signatures will not appear in Enceit Care.

Last reviewed: 2026-09-16

Need more help? Back to Help Center