Record allergies

Recording a patient's allergies keeps them visible to everyone giving medications. Allergies are shown prominently on the Medications tab so staff can review them before administering.

Add an allergy

  1. Open the patient's chart and go to the Medications tab.
  2. Open Allergies and select Add allergy.
  3. Enter the allergen (for example, Penicillin). This is the only required field.
  4. Optionally add:
    • Type — medication, food, environmental, or other.
    • Reaction — what happens (for example, hives, swelling).
    • Severity — mild, moderate, severe, or unknown.
    • Onset date, reported by, and notes.
  5. Save.

Verify an allergy

A clinician can mark an allergy as verified to confirm it's been reviewed. You can also mark an allergy inactive (without deleting it) if it no longer applies.

How allergies appear

  • A banner at the top of the Medications tab lists the patient's allergens. It stands out when allergies are present so it's hard to miss.
  • Expanding the banner shows each allergy's type, severity, and reaction, with a colored badge for severity.
  • The banner is shown above the MAR, so allergies stay in view while you record doses.

Allergy cross-check during administration

When you record a dose, the system compares the medication against the patient's recorded allergies and flags a potential match for the record. Always review the allergy banner and use your clinical judgment — the cross-check is a safety aid, not a substitute for review, and it does not block recording.

Last reviewed: 2026-06-25

Need more help? Back to Help Center